CXSF Type Pool Pump

Suitable for scenarios such as villa courtyard pools and outdoor leisure pools. It drives the circulation of pool water through the pump body, delivering the water to supporting equipment like sand filter tanks and diatomaceous earth filters to remove hair, dust, and microorganisms (e.g., algae spores, bacteria) from the water. When combined with disinfection systems (such as UV disinfection and chlorine tablet disinfection), it achieves water purification. The series offers a flow rate of 300~530 L/min, ensuring the pool water completes a full circulation every 1~2 hours (meeting the hygienic standards for pool water quality) and preventing algae growth and water turbidity caused by stagnant water.

Applicable to commercial pools with an area of ≤100㎡, such as children’s pools in parent-child parks and supporting pools in rural guesthouses. Its high-flow feature can meet the demand for rapid water purification after simultaneous use by multiple users. With an IP55 protection rating, it can resist outdoor rain splashes and humid moisture around the pool, eliminating the need for additional waterproof shelters and reducing installation costs. The integrated handle design also facilitates transportation and position adjustment during later maintenance.

It can be used with a pool vacuum cleaner: through its self-priming function, it sucks sediment (e.g., sand, fallen leaves) at the bottom of the pool into the filtration system. Alternatively, it can be directly connected to a high-pressure water gun for cleaning the ground around the pool. It combines circulation filtration and auxiliary cleaning functions, improving the efficiency of pool maintenance.

Independently developed with reference to mainstream market dimensions, this means its installation dimensions (such as water inlet and outlet spacing, base plate fixing hole positions) and interface specifications are highly compatible with most existing pool filtration systems and pipeline accessories. There is no need for additional custom adapters or modification of installation space, and it can directly replace old circulation pumps, reducing upgrade and transformation costs. It is particularly suitable for equipment renewal scenarios of existing pools.

Integrated Handle: Compared with traditional pump bodies without handles, it is easier to grip during transportation and convenient to adjust the angle during installation and positioning. A single person can complete the operation, reducing labor costs.

Transparent Cover and Filter Basket Configuration: The pump body is equipped with a transparent cover and a filter basket. The filter basket can pre-filter large-particle impurities in the water (such as fallen leaves and hair in the pool), reducing the frequency of blockages in subsequent filters. The transparent cover allows for intuitive observation of the filter basket's clogging status; there is no need to disassemble the pump body to determine whether cleaning is required, shortening maintenance time by more than 50%.

Standardized Interfaces: Joint sizes are available in two specifications: 48.5mm and 50mm, which are compatible with conventional DN50 (2-inch) pool-specific pipelines. Quick sealed connection is achieved through supporting joint nuts, no welding is required during installation, and ordinary users can complete the installation by referring to the instruction manual.

With a self-priming height of 3 meters, it can directly absorb water from the bottom of the pool without the need to install additional priming devices in the water inlet pipeline, simplifying system configuration. At the same time, it can be adapted to scenarios requiring "low-level water absorption" such as pool vacuuming and ground cleaning. Compared with circulation pumps without self-priming function, it has more extensive application scenarios, and there is no need to purchase additional dedicated water suction pumps.