CXGM Type Pool Pump

Suitable for small domestic swimming pools, outdoor leisure pools, or small hotel swimming pool facilities. It drives pool water into filtration devices (such as sand filters, diatomaceous earth filters) to remove contaminants like hair, dust, and microorganisms from the water. At the same time, it works with disinfection equipment (such as UV sterilizers, chlorine disinfection systems) to achieve water purification, ensuring the hygiene of pool water and enhancing the safety and comfort of swimming.

Installation and Maintenance:

Integrated Handle Design: Compared with traditional pump bodies without handles, it is easier to grip and position during transportation and installation, making it particularly suitable for single-person operation or installation in narrow spaces (such as equipment cabinets, corners of pool machine rooms).

Stainless Steel Mouth Ring Reinforcement: The water inlet and outlet are reinforced with stainless steel, which is more wear-resistant and corrosion-resistant than ordinary plastic interfaces. This reduces the risk of interface deformation or water leakage during long-term use and extends the overall service life of the equipment.

Transparent Cover and Filter Basket Configuration: The pump body is equipped with a transparent cover and a filter basket. The filter basket can pre-filter large-particle impurities (such as residual bait in breeding ponds, hair in swimming pools), reducing the burden on the subsequent filtration system. The transparent cover allows for intuitive observation of the filter basket's clogging status; there is no need to disassemble the pump to determine whether cleaning is required, which lowers the frequency and difficulty of maintenance.

Insulation Class F: Higher than the conventional Class B insulation, the motor has stronger temperature resistance, can withstand short-term overload heating, and is suitable for high-temperature environments in summer (such as beside open-air swimming pools) or scenarios requiring long-term continuous operation.

Protection Class IP55: Complies with international and domestic IP protection standards. It can effectively block dust accumulation (to avoid poor heat dissipation of the motor) and low-pressure water jets (such as splashing water during water changes in breeding ponds, cleaning water around swimming pools), reducing malfunctions caused by humidity and dust and improving equipment stability.

The series includes multiple models with a flow rate range of 195~470 L/min and a lift range of 7~18.5 m, which can be flexibly selected according to the water volume. For example, CXGM50 is suitable for small breeding ponds/pools of 10~20 cubic meters, and CXGM200 is suitable for medium-sized breeding ponds/pools of 30~50 cubic meters. This avoids problems such as "incomplete circulation when a small pump is used for a large pool" or "energy waste when a large pump is used for a small pool".